February 2006

GE Security is pleased to announce the immediate availability of
Service Pack 2 for Secure Perfect v5.

Service Pack 2 for Secure Perfect v5 delivers software enhancements and defect resolution for the following:

1. Support for HDS Cybermation (High Density Matrix Switcher)
2. Fix--transmission of PTZ camera commands to GE DVMRe Triplex
3. Fix--DO not resetting when DO Groups assigned to a logical alarm (Lost/Invalid Badge) are Purged/Acknowledged for reader DOs or if DO has On-time of 0
4. Fix--incorrect Badge Description displayed on Badge Form if Arabic characters used
5. Fix--intermittent failure on multiprocessor computers where after closing and reopening the alarm monitor, it may display alarms that were previously acknowledged or purged as not being acknowledged or purged
6. Fix--for European operating systems where the time reported by the microcontroller may be incorrect, even if the host and microcontroller are in the same time zone
7. Fix--communications error with certain Pelco CCTV devices due to protocol change
8. Fix--workstation performance degradation due to 100% CPU utilization when live video from multiple DVMRs are simultaneously played
9. Fix--behavior between daily and continuous for "T&A First In Last Out" report
10. Fix--facilities filtering with "email on alarm"
11. Fix--memory leak when turning microcontroller online and offline

Service Pack 2 for Secure Perfect v5 includes firmware v5.0.04:

1. This version of firmware is supported on all Secure Perfect v5 systems and includes the following enhancements and/or defect resolution since v5.0.00:

   i. Originally part of Service Pack 1

   1. Fix--DO remains latched after a forced door alarm is triggered followed by a REX condition or valid badge
   2. Support for US Robotics PCMCIA modem on M5 PXN CPU card
   3. Low Battery alarm feature available on M2000 with a host registry
   4. Added custom format support on WIU for 26-bit, 32-bit, Hughes35, Hughes37 and 4001
   5. Fix--corrected Flashtool reporting "No Application Code, Checksum = 000000"

   ii. New in Service Pack 2

   1. Fix--order in which Alarm / Reset messages are processed after reconnecting to an offline microcontroller, re-ordered to comply with UL 1076
   2. Fix--address of downstream microcontrollers intermittently not being stored correctly
   3. Fix--undefined floor selection in history records causing erroneous conclusions by host
   4. Support for two consecutives Zone Arm / Disarm requests without an intervening badge transaction
   5. Fix--intermittent corruption of issue date field during badge learn transaction
   6. Fix--clearing of APB status upon host initiated request for Clear All APB function
   7. Fix--AC Power Fail and Tamper alarm reporting incorrectly immediately after power up or reset
   8. Fix--AC Power Fail and Tamper alarm count reporting incorrectly in the alarm monitor
   9. Fix--printer routing on elevator readers
   10. Fix--elevator reader failing to operate when numerous updates to Access Rights executed
   11. Fix--Force alarm reported as Held alarm when DI alarm sense value is non-zero
   12. Support for Billionton PCMCIA network card
   13. Fix--now able to open door when reader is set for armed intrusion zon

The Service Pack can be downloaded from our Web site at www.GESecurity.com. Select For Partners, “Enterprise CasiRusco Business Partner” Login, then login with your User Name and Password. To access the service pack, click on Downloads, Secure Perfect, and then Service Packs. If you experience any problems during this process, please contact GESecurity customer support at 1-888-GESECURITY.