Compatibility Specifications

PXNplus CPU Board

	PXNplus
Enclosures supported	M5, M2000, M3000
Interface boards supported	2RP, 2SRP, 8RP, CK8RP, 20 DI, 16 DO, 16 DOR, PX-2000 Interface Board
Communications Interfaces:
Direct Serial (RS-232, RS-422)	Yes
Direct Serial Baud Rates	2400, 4800, 9600, 19200
Direct Serial cabling	Belden 8723, 2-pair shielded, 22-AWG
Dialup Serial	Yes, optional plug-in modem card; can be either primary communications or backup for network communications, 52124700.; an external modem may also be used
Network	Yes, 10/100 MB Ethernet, on-board Ethernet RJ-45 connection, TCP/IP
Network, Static IP	Supported
Network, DNS, DHCP	Supported
Operating System	ucLinux
Processor	Xilinx
RAM	32 MB
FLASH Memory	8 MB
Applications Supported	SP 6.11 or higher, PP 2.x or higher
Application Capacities:
Secure Perfect 6.x, badge capacity	128,000
Secure Perfect 6.x, offline badge history capacity	8,192*
Secure Perfect 6.x, offline alarm history capacity	8,192*
Picture Perfect 2.x badge capacity	200,000
Picture Perfect 2.x, offline badge history capacity	5,000*
Picture Perfect 2.x, offline alarm history capacity	2,000*
Picture Perfect 3.x badge capacity	145,000
Picture Perfect 3.x, offline badge history capacity	5,000*
Picture Perfect 3.x, offline alarm history capacity	2,000*

* Default allocation, capacity can be re-allocated between badge and alarm history

Enclosures

Enclosure Specifications	M5	M2000	M3000
Physical Dimensions	14 inches (356mm) x 10.5 inches (267mm) x 6.25 inches (159mm)	14 inches (356mm) x 14 inches (356mm) x 3.5 inches (84mm)	17 inches (431mm) x 15.6 inches (396mm) x 6.2 inches (158mm)
Operating Environment	+35°F to +122°F (+2°C to +50°C)	+35°F to +122°F (+2°C to +50°C)	+35°F to +122°F (+2°C to +50°C)
Humidity Range	5% to 95% non-condensing	5% to 95% non-condensing	5% to 95% non-condensing
Thermal air cooling	At least 6 inches (15.2cm) of clearance is required on all four sides of the controller enclosure	At least 6 inches (15.2cm) of clearance is required on all four sides of the controller enclosure	At least 6 inches (15.2cm) of clearance is required on all four sides of the controller enclosure
Construction	Gavannealed Steel	Colled Rolled Steel	Gavannealed Steel
Finish	Gray Powder Coat Textured Paint	Gray Baked Enamel Paint	Gray Powder Coat Textured Paint
Weight	15 lbs.	18 lbs.	35 lbs.
Power (Door strikes powered separately)	M5	M2000	M3000
Controller powered by	External 12-15 VDC, 3 to 6 Amp supply, battery backup recommended; external power supply purchased separately	110 or 230 VAC to 18 VAC Transformer included; 7AH jell-cell battery for battery backup included	110/230 VAC to 12 VDC 6 Amp Power Supply included; 7AH jell-cell battery for battery backup included
Controller Power Requirements	12 to 15 VDC, 3 to 5 Amps recommended power supply rating 8 Reader Proximity (9xx):    3 Amp 8/16 reader non-Proximity: 3 Amps 16 reader Proximity: 5 Amp (if installing more than two 16 DO/DOR boards in the same M5, a 5 Amp power supply is recommended)	Provided transformer meets all power requirements for this device	Provided power supply meets all power requirements for this device
Power dissipation	50 watts maximum	50 watts maximum	72 watts maximum
Expansion	M5	M2000	M3000
Total number of available slots for Reader, Input or Output boards	5	N/A	5
Boards and devices (standard and optional)	M5	M2000	M3000
2000 Interface Board	N/A	Maximum one PX-2000 interface board which includes support for: Four readers, either F/2F or Supervised F/2F reader communications (maximum rating of each reader port power is 300mA for a total power output of 1.2 Amps) Ten supervised digital input points Supervised resistors (20 each 1K ohms) are included Output devices: Four reader outputs: 0.10 @12 VDC maximum Eight general purpose digital outputs with relays, 2 Amps @ 40 VDC or 30 VAC maximum	N/A
Power Communications Board	Included: requires 12 to 15 VDC 3 to 6 Amp power input	Not Applicable	Included: requires 12 to 15 VDC, 3 to 6 Amp power input; 6 Amp supply included
2 RP Board	Maximum 4	Not Applicable	Maximum 4
2SRP Board	Maximum 4	Not Applicable	Maximum 4
8 RP Board	Maximum 2	Not Applicable	Maximum 2
CK8RP Board	Maximum 2	Not Applicable	Maximum 2
20 Digital Input Board	Maximum 4	Not Applicable	Maximum 4
16 Digital Output Board	Maximum 4	Not Applicable	Maximum 4
16 Digital Output with Relays Board	Maximum 4	Not Applicable	Maximum 4
External Modem	Optional 110 VAC: 420173001	Optional 110 VAC: 420173001	Optional 110 VAC: 420173001 (not recommended)
	Optional 230 VAC: 420173002	Optional 230 VAC: 420173002	Optional 230 VAC: 420173002 (not recommended)
Internal Modem	Optional PXNplus CPU only: 521247001	Optional PXNplus CPU only: 521247001 Optional microcontroller powered (PX CPU): 450224001	Optional PXNplus CPU only: 521247001 (recommended)
Rack Mounting Kit	Not Applicable	Not Applicable	Optional, 521223001
Regulatory information	M5	M2000	M3000
Listings	> FCC Class A > UL 294 > UL 1076 > CE	> FCC Class A > UL 294 > UL 1076 > CE	> FCC Class A > UL 294 (pending) > UL 1076 (pending) > CE